Last Updated: November 12, 2026
Quick Summary
Solar accreditation renewal means meeting the Clean Energy Council’s conditions before you apply: a current electrical licence, completed mandatory training modules and enough CPD points. Then you submit the renewal through the online portal, ideally 4 to 6 weeks before your accreditation expires.
- Confirm your state electrical licence is current before starting, since a lapsed licence stops renewal.
- Check the core and elective CPD category split, not just your total points.
- Log CPD activities on the day, storing certificates in one folder for evidence.
- Submit your application 4 to 6 weeks before expiry to leave buffer for queries.
- Stop installing accredited systems if accreditation expires, as STC eligibility may be affected.
Table of Contents
- Who Needs to Renew Solar Installer Accreditation
- Solar Accreditation Renewal Requirements You Must Meet
- Solar Accreditation CPD Points: How Many You Need and How to Track Them
- Step-by-Step: Completing Your Solar Accreditation Renewal Application
- Solar Accreditation Renewal Checklist and Timeline
- Late, Expired and Declined Renewals: What to Do Next
- Booking Your Next Solar Installation Review with GridFree Solar
- Frequently Asked Questions
Who Needs to Renew Solar Installer Accreditation
If you install solar panels or batteries for Australian homeowners, your Clean Energy Council (CEC) accreditation needs renewing on a regular cycle.
The solar accreditation renewal process applies to accredited individuals who design, install or commission small-scale systems. Clean Energy Council accreditation scheme guidance
Watch out: letting accreditation lapse can affect your ability to claim Small-scale Technology Certificates on your installations, so check the scheme rules for your situation.
Solar Accreditation Renewal Requirements You Must Meet
Renewal is not a formality. You need to meet a set of conditions before you submit anything, and most delays come from one of them being missed. The requirements below are the ones that matter most.
The core requirements are:
- A current electrical licence held in your state or territory
- Completed continuing professional development (CPD) points
- Completed mandatory training modules
The CEC accreditation renewal requirements set out the detailed conditions and should be checked against the version current at the time you apply.
Electrical licence and eligibility
Your electrical licence must be current and in good standing. Licences are issued at state level in Australia, so check the licensing body in the state where you work. See the Victorian eligibility rules for solar export and installation. A lapsed licence will stop your renewal, even if your CEC paperwork is complete. Keep your licence number ready, because the application asks for it.
Mandatory training modules
Renewal usually requires you to complete mandatory training modules from the approved course list. These cover safety, system design and the scheme rules that apply to your accreditation. Check which modules are required for your accreditation category before you enrol, as the list can change. Use the full battery rebate qualification checklist to confirm what applies to you. Book your training early, since popular courses fill quickly near renewal dates.
Solar Accreditation CPD Points: How Many You Need and How to Track Them
Continuing professional development is the part of renewal most installers leave to the last month, and it is also the part that most often causes a renewal to be returned. The requirement is not vague: the scheme sets an annual CPD obligation, and you need to be able to evidence every point you claim.
The annual CPD obligation
Accredited installers and designers should check the current CPD obligation set by the scheme, which is accumulated across the accreditation period. Points are awarded for structured learning, approved training courses, industry webinars, manufacturer product training, conference sessions and similar activities, with the points value set by the activity, not by the hours you spend.
Spreading CPD across the year is generally easier than leaving it to the final weeks before expiry, when popular courses may be fully booked.
Clean Energy Council CPD requirements and approved activities
Core and elective categories
CPD under the scheme is not a single undifferentiated pool. CPD activities may fall into different categories, and there can be limits on how many points from any one category count towards your total, so check the current category split with the scheme. Check the current category split before you book a block of training, because discovering in month eleven that half your points do not count is the single most common CPD problem.
A CPD tracker that actually works
A spreadsheet is enough. Set up one row per activity with these columns:
- Date completed
- Activity name and provider
- Category (core or elective)
Then apply three habits:
- Log on the day. Enter the activity the same day you complete it, while the certificate is still in your inbox. Activities logged from memory three months later are the ones that get disputed.
- Store evidence in one folder. Keep certificates and completion emails in a single cloud folder named by year. If the scheme asks for evidence during a renewal or an audit, you want to be able to produce it in minutes, not days.
- Review quarterly. Diarise a 15-minute review at the end of each quarter. Compare your running total against the pro-rata target for the point you are at in the year, and check the category split at the same time. If you are behind, you have a whole quarter to fix it rather than a weekend.
Watch out: points claimed for an activity you cannot evidence are treated as not claimed, so the certificate matters as much as the course.
Planning the year around your renewal date
Work backwards from your expiry date and plan your CPD to be complete before you submit. Map the quarters before submission and allocate a target to each, a common pattern is to front-load the core technical content in the first half of the year, when course calendars are quieter, and use the second half for elective activities and any top-up needed to close a category shortfall.
Step-by-Step: Completing Your Solar Accreditation Renewal Application
Once your requirements are met, the application itself is straightforward. Work through it in order and keep every document ready before you start.

- Confirm your electrical licence is current.
- Check your CPD total covers the required points.
- Confirm all mandatory modules are complete.
- Gather your identity and business documents.
- Log in to the online portal and submit your renewal application.
- Save the confirmation and watch for a response.
Gathering identity and business documents
Have these documents ready before you begin:
- Proof of identity (such as a passport or driver’s licence)
- Your electrical licence number and expiry date
- Your business number or ABN
Scan documents clearly in a common file format. Blurry or cropped scans are a frequent reason for returned applications.
Submitting through the online portal
Log in to the accreditation portal using your registered details. Select the renewal option, enter your information, upload your documents and submit. Some people find the portal fiddly, so save your progress often and use a supported browser. If you can’t log in, use the password reset option first, then contact support if the problem continues.
Solar Accreditation Renewal Checklist and Timeline
This is the section to bookmark. It converts the requirements above into a dated sequence, so you know what to do and when, rather than discovering a gap in the week your accreditation expires.
The end-to-end renewal checklist
Preparation (start 8-12 weeks before expiry)
- Confirm your electrical licence is current and note its number and expiry date
- Pull your CPD log and check the running total against the annual obligation
- Check the core/elective category split, not just the total
Submission (aim for 4-6 weeks before expiry)
- Scan identity, licence and training evidence clearly in a common file format
- Log in to the accreditation portal and select the renewal option
- Complete every field, including the licence number and expiry date
After submission
- Watch your registered email, including the spam folder, for requests for further information
- Respond to any request for evidence within the stated window
- Save the renewal confirmation once issued
A realistic timeline
| When | What to do |
|---|---|
| 12 weeks out | Audit CPD total and category split; book any missing training |
| 8 weeks out | Complete outstanding modules; chase certificates |
| 6 weeks out | Finalise documents; check identity and business details |
| 4-6 weeks out | Submit application and pay the fee |
| 2 weeks out | Follow up if you have had no acknowledgement |
| Expiry date | Accreditation period ends, do not install accredited systems beyond this date unless renewed |
Processing time is not instant, and an application that triggers a request for further information may take longer to resolve. That is the reason for submitting weeks early rather than days early: the buffer absorbs one round of queries without your accreditation lapsing in the meantime.
Fees and payment stages
Renewal costs are not a single number, and it helps to budget for them separately:
- Renewal fee, payable to the scheme administrator when you submit the renewal application
- Training costs, paid to the training providers for mandatory modules and CPD activities, separate from the renewal fee
- Late or reinstatement costs, where the scheme allows renewal after expiry, additional costs may apply
Fee amounts are reviewed periodically, so confirm the current figures on the official scheme website on the day you pay rather than relying on a figure from a previous cycle. Keep the receipt with your renewal records; it is useful if there is any dispute about whether a payment was received.
Late and expired scenarios
If you realise your accreditation has already expired, the sequence changes:
- Stop installing accredited systems immediately. Do not sign off work you are no longer accredited to sign off.
- Check whether a grace or reinstatement pathway applies to your category and how long it has been since expiry. Short lapses are usually simpler to resolve than long ones.
- Contact the scheme administrator and ask what is required for your specific situation before you submit anything.
- Expect additional requirements, reinstatement after a lapse can require evidence of recent CPD or additional training, not just payment of a fee.
- Do not assume STC eligibility is unaffected. Work installed while accreditation is lapsed may not be able to claim Small-scale Technology Certificates, which is a cost to your customer and your reputation, not just your paperwork.
Watch out: the most expensive mistake in this whole process is treating the expiry date as a soft deadline, the scheme does not, and neither do the customers whose systems depend on your signature.
Late, Expired and Declined Renewals: What to Do Next
Sometimes renewals go wrong. An application may be returned for missing evidence, or accreditation may lapse before you renew. Act quickly in either case.
If your application is declined, read the reason in the notice, fix that specific issue and resubmit. If your accreditation has expired, stop installing accredited systems until it is restored, and contact the scheme administrator for guidance on your options.
Common pitfalls include:
- Uploading the wrong document type
- Forgetting to renew an electrical licence first
- Missing an expiry date and assuming a grace period applies
Setting calendar reminders well before any deadline is a sensible way to treat renewal as routine maintenance.
Booking Your Next Solar Installation Review with GridFree Solar
Keeping your accreditation current matters most when it supports quality work. If you want a second pair of eyes on a system design, GridFree Solar offers solar panel and battery storage installation services designed to help Australian homeowners achieve smarter energy management and cost savings. Check what our review service covers before you book.
Frequently Asked Questions
How do I renew my solar installer accreditation?
Log in to the online portal of the accreditation scheme, confirm your personal and electrical licence details, complete the required CPD points and mandatory training modules, upload your supporting documents and submit the renewal application before your accreditation period ends. Keep a copy of the submission confirmation. If any detail changes after you submit, update it through the portal so the record matches your licence and business details.
How many CPD points are required for solar accreditation renewal?
Accredited solar installers must complete continuing professional development in each accreditation period, and the total is set by the accreditation scheme rules for your category. Plan your CPD across the full period rather than in the final month, record certificates from each approved training provider as you complete them, and check that each course is recognised before you enrol. Keep evidence for at least the length of the period in case it is requested.
Can I renew my solar accreditation after it expires?
Whether an expired accreditation can be renewed depends on the rules of the scheme and how long ago it lapsed. Check the status on the portal as soon as you notice a deadline has passed, and contact the scheme administrator for guidance on the available options. Do not carry out work that requires accreditation while your status is expired, as this can affect your ability to claim incentives for installations.
What happens if my solar accreditation renewal is declined?
If an application is declined, the decision notice should explain the reason, such as missing CPD evidence, incomplete identity documents or an electrical licence that is not current. Address the specific issue, gather the correct documents and resubmit through the portal. If you believe the decision is wrong, ask the scheme administrator to review it and provide the evidence supporting your application.